Maslak Mah. Aos 55 Sok. B Blok Apt no:4/542 SARIYER/İSTANBUL/TÜRKİYE
+90 537 543 66 33

NedZink

Erfer > NedZink

 

NedZink Titanium Zinc

NedZink produces titanium zinc according to EN 988, an alloy based on electrolytically cleaned zinc with a purity of min. 99.995 % Zn (Z1 according to EN 1179) with small additions of the alloy elements copper, titanium and aluminium.. The chemical composition, the mechanical and physical properties and measurement tolerances are determined in the KOMO product certificate and the product certificate from Lloyd’s Register, Industrial Quality Scheme for Product Certification by Surveillance of Quality Systems (approval No. QIS 122). Compliance with the set material properties is checked at regular intervals by an independent and neutral control body, Lloyd’s Register.

NedZink NATUREL

NedZink NATUREL is a durable, aesthetic material. The patina layer originates by the formation of a zinc carbonate base, This process starts under the influence of the weather conditions. It has a natural course, so the full grey shade is obtained after one to four years.

 

Sheets
Thickness 0.70mm – 0.80mm – 1.00mm
 

Standard Sizes

 1000 x 2000 mm
1000 x 2250 mm
1000 x 3000 mm
Packing Bir palette yaklaşık 1 ton vardır / on pallets of approx. 1 ton

 

Standard Coils
Thickness 0.70mm – 0.80mm – 1.00mm
Available Widths 150 – 1000 mm
Coil inside dimension 508 mm
Weight Min. 930 kg—Max. 2800 kg (1000 mm genişlikte) / Min. 930 kg — Max. 2800 kg (at width 1000 mm)

NedZink NOVA

The uniform medium-grey of NedZink NOVA originates after a chemical surface treatment following the rolling process_ Colour fast approaching the most natural patina tint.

 

Sheets
Thickness 0.70mm – 0.80mm – 1.00mm
Standard Sizes 1000 x 2000 mm
1000 x 2250 mm
1000 x 3000 mm
Packing Bir palette yaklaşık 1 ton vardır / on pallets of approx. 1 ton

 

Standard Coils
Thickness 0.70mm – 0.80mm – 1.00mm
Available Widths 150 – 1000 mm
Coil inside dimension 508 mm
Weight Min. 930 kg—Max. 2800 kg (1000 mm genişlikte) / Min. 930 kg — Max. 2800 kg (at width 1000 mm)

NedZink NOIR

In addition to the patina grey NedZink NOVA, NedZink has a second variant of prepatinated titanium zinc called NedZink NOIR. This variant has a virtually black surface.

 

Sheets
Thickness 0.70mm – 0.80mm – 1.00mm
Standard Sizes 1000 x 2000 mm
1000 x 2250 mm
1000 x 3000 mm
Packing Bir palette yaklaşık 1 ton vardır / on pallets of approx. 1 ton

 

Standard Coils
Thickness 0.70mm – 0.80mm – 1.00mm
Available Widths 150 – 1000 mm
Coil inside dimension 508 mm
Weight Min. 930 kg—Max. 2800 kg (1000 mm genişlikte) / Min. 930 kg — Max. 2800 kg (at width 1000 mm)

 

NedZink NOVA COMPOSITE

NedZink NOVA COMPOSITE is a panel consisting of two layers of pre-weathered zinc ‘NedZink NOVA’ and a LDPE core.This combination creates a stiff and flat panel which is perfect for cladding applications. Gluing, cassettes, clamping or screwing, for any application a solution is available. This combination creates a stiff and flat panel which is perfect for cladding applications. Gluing, cassettes, clamping or screwing, for any application a solution is available. NedZink NOVA COMPOSITE can be applied to large façade coverings without any wave formation. Even panels of 1,000 x 6,000 mm can be applied. Rounded elements and forms are easily realized. Given the appearance and versatility of the product the opportunities for creative design are endless.

Technical Characteristics NedZink NOVA COMPOSITE
Standard Sizes 3.200 x 1.000 mm
Standart Panel Thickness 4 mm
Panel Combination Top and at the bottom : 2 x 0.50 mm NedZink NOVA
Core: 3 mm Polyethylene – low density
Tolerances Thickness : -0 / +0.4 mm
Width : +/ -2.0 mm
Lenght : -0 / +4.0 mm
Diagonal : max 3.0 mm

NedZink NOVA COMPOSITE

NedZink NOVA Pro-Tec is a titanium zinc material which has been developed for hot or cold roof applications and covered with protective layer on the back_ This protection layer, protects the zinc from the negative effects of water vapor and other substances. Good properties of zinc on the upper surface are preserved. NedZink NOVA Pro-Tec is recommended for all types of applications, especially for non-ventilated, moisture-proof hot roof and exterior applications.

 

NedZink NOVA Pro-Tec Coils
Width 600 mm — 650 mm —670 mm —1000 mrn
Thickness 0.70mm – 0.80mm – 1.00mm
Weight Max. 2800 kg (1000 mm genişlikte) / Max. 2800 kg (at width 1000 mm)

 

NedZink NOVA Structure

An addition to the product range is `NedZink NOVA STRUCTURE’, prepatinated `NedZink NOVA’ zinc with a surface structure, available in various motifs. Can be used as roofing and covering in interior.

 

NedZink NOVA STRUCTURE  Sheets
Standard Sizes 1000 x 3000 mm
Thickness 0.80 mm
Packing Bir palette yaklaşık 1 ton vardır / on pallets of approx. 1 ton

NedZink NATURAL Pro-tec

NedZink NATUREL Pro-Tec is titanium zinc produced by NedZink according to EN 988 with a protective coating on the back side for application on either cold or hot roof constructions. Small quantities of the alloy elements copper, titanium and aluminium are added to electrolytically refined zinc (with a purity of min_ 99,995% Zn, Z1 according to EN 1179) based on EN 988.

 

NedZink NATURAL Pro-Tec Coils
Width 600 mm — 650 mm —670 mm —1000 mrn
Thickness 0.70mm – 0.80mm – 1.00mm
Weight Max. 2800 kg (1000 mm genişlikte) / Max. 2800 kg (at width 1000 mm)

NedZink NUANCE

NedZink NUANCE is pre-weathered titanium zinc provided with pigments. These pigments also provide additional protection to pre-weathered zinc. Natural properties of titanium zinc; High durability, maintenance-free and good deformation properties are fully protected. NedZink NUANCE is mainly used for aesthetically high quality building applications: it can be used for exterior applications, for roofs and facades, and for interior design applications.

NedZink ‘NUANCE Blue’

NedZink NUANCE

NedZink Red’ ‘NUANCE Green’

NedZink NUANCE Coils

NedZink NUANCE Coils
Width 600 mm —1000 mrn
Thickness 0.70mm
Weight Max. 1400 kg (1000 mm genişlikte) / Max. 1400 kg (at width 1000 mm)

NedZink Typical Details

Ventilated Facade System

Damp Proof Facade System

Ventilated Roof System

Damp Proof Roof System

NedZink Installation Systems

Standing Seam System

Single Standing Seam: Single Standing Seam System is generally preferred for facade cladding.

For application of this upright system, the inclination is min. 25 °, if there is a high risk of snow, min. It should be 35 °.

Double (Lock) Standing Seam: Double (Lock) Standing Seam system should be used on slopes less than 25 °. The bays are fixed to the substructure by fixing them with fixed and sliding clips.

Roll Cap System

The rool Cap system is a traditional roofing system which is formed by the installation of trapezoidal wood rails between titanium zinc sheets. These wood rails generally have 40-50 mm thickness. It is formed by bending the vertical edges of the panels inward. In this systems, materials are installed with clips on wood substructure. In addition, the panels are fastened with the help of clips. Fixed and sliding clips should be used.

Losenge System

The losenge system is used for covering slop-ing and vertical surfaces of various sizes. The minimum inclination of the substructure is 25 ° when the top of the losenge is soldered. Standard system, It consists of small, uniform bended plates connected to each other. Although the rhombus is often used, the most common form is the square. This system provides a good solution for coating medium curved surfaces.

REFERENCE

For detailed information about our products

DOWNLOAD CATALOG